0006978: skge driver hit error, disables, and interface becomes unusable

Related stuff from dmesg:<br /> <br /> [...]<br /> skge 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16<br /> skge 1.13 addr 0xfebfc000 irq 16 chip Yukon-Lite rev 9<br /> skge eth0: addr 1c:bd:b9:84:0f:1d<br /> 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)<br /> 8139cp 0000:03:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too<br /> 8139too Fast Ethernet driver 0.9.28<br /> 8139too 0000:03:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17<br /> eth1: RealTek RTL8139 at 0xffffc90000c6cc00, 00:0a:cd:1a:dd:ba, IRQ 17<br /> parport_pc 00:06: reported by Plug and Play ACPI<br /> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]<br /> iTCO_vendor_support: vendor-support=0<br /> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh<br /> iTCO_wdt: Found a ICH9DO TCO device (Version=2, TCOBASE=0x0860)<br /> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)<br /> ppdev: user-space parallel port driver<br /> udev: renamed network interface eth0 to rename2<br /> udev: renamed network interface eth1 to eth0<br /> udev: renamed network interface rename2 to eth1<br /> device-mapper: uevent: version 1.0.3<br /> [...]<br /> eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1<br /> skge eth1: enabling interface<br /> ADDRCONF(NETDEV_UP): eth1: link is not ready<br /> skge eth1: Link is up at 1000 Mbps, full duplex, flow control none<br /> ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready<br /> eth0: no IPv6 routers present<br /> eth1: no IPv6 routers present<br /> [...]<br /> python[26014]: segfault at 58 ip 00007f3951f34625 sp 00007f39433ad220 error 4 in libpython2.7.so.1.0[7f3951e59000+172000]<br /> python[32082]: segfault at 58 ip 00007f7ad2065625 sp 00007f7abf3bb130 error 4 in libpython2.7.so.1.0[7f7ad1f8a000+172000]<br /> python[466]: segfault at 58 ip 00007f1d5c986625 sp 00007f1d4de01130 error 4 in libpython2.7.so.1.0[7f1d5c8ab000+172000]<br /> python[1739]: segfault at 58 ip 00007feee5348625 sp 00007feed67c1af0 error 4 in libpython2.7.so.1.0[7feee526d000+172000]<br /> [...] ^ caused python to segfault<br /> <br /> See attached output from /var/log/messages.