I started installation from a USB disk which I had copied from ISO CentOS-7.0-1406-x86_64-Minimal through dd.<br />
<br />
The installation started properly. I selected target device. It was by default set to auto partioning. I wanted to auto partion but also I wanted to see what partionining scheme auto partion is doing, so I fiddled with different options below auto partioning as they were not very clear in meaning. I at a point selected manual partioning & I want to add more space etc also to see what would happen. At no point I created any partitions on my own. Just selected diff options. Then I went back to auto partioning since the GUI was not showing the partioning it would do & I think it crashed at that point.<br />
<br />
In between I had changed the network settings & NTP settings many times to see if NTP can be turned on without connecting the ethernet.<br />
<br />
I then was changing between options to turn on debugging which would take me to console etc. After selecting diff options, I then finally selected reporting when GUI froze. So I scp-eed the dir which I had tarred & which I am attaching.<br />
<br />
I hope this helps.<br />
Thanks
↧