0007942: Problem with driver bnx2x

I have Centos7 installed on HP bl460c Gen9. Machine has two interfaces:<br /> 06:00.0 Ethernet controller: Broadcom Corporation BCM57840 NetXtreme II 10/20-Gigabit Ethernet (rev 11)<br /> 06:00.1 Ethernet controller: Broadcom Corporation BCM57840 NetXtreme II 10/20-Gigabit Ethernet (rev 11)<br /> <br /> On kernel 3.10.0-123.9.3.el7 first of them doesn't work (link down) when second works great:<br /> eno49: flags=6147<UP,BROADCAST,SLAVE,MULTICAST> mtu 1500<br /> eno50: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST> mtu 1500<br /> <br /> [ 70.102848] bnx2x 0000:06:00.0 eno49: NIC Link is Up, 1000 Mbps full duplex, Flow control: none<br /> [ 70.157877] bnx2x 0000:06:00.0 eno49: NIC Link is Down<br /> <br /> # ethtool eno49<br /> Settings for eno49:<br /> Supported ports: [ FIBRE ]<br /> Supported link modes: 1000baseT/Full<br /> 10000baseT/Full<br /> Supported pause frame use: Symmetric Receive-only<br /> Supports auto-negotiation: Yes<br /> Advertised link modes: 1000baseT/Full<br /> 10000baseT/Full<br /> Advertised pause frame use: Symmetric Receive-only<br /> Advertised auto-negotiation: Yes<br /> Speed: Unknown!<br /> Duplex: Unknown! (255)<br /> Port: FIBRE<br /> PHYAD: 1<br /> Transceiver: internal<br /> Auto-negotiation: on<br /> Supports Wake-on: g<br /> Wake-on: g<br /> Current message level: 0x00000000 (0)<br /> <br /> Link detected: no<br /> <br /> Upgrading the kernel to kernel-ml-3.17.4-1.el7.elrepo.x86_64 resolved this problem.<br /> Related info:<br /> <a href="https://lists.launchpad.net/kernel-packages/msg80453.html">https://lists.launchpad.net/kernel-packages/msg80453.html</a> [<a href="https://lists.launchpad.net/kernel-packages/msg80453.html" target="_blank">^</a>]<br /> <a href="http://patchwork.ozlabs.org/patch/358990/">http://patchwork.ozlabs.org/patch/358990/</a> [<a href="http://patchwork.ozlabs.org/patch/358990/" target="_blank">^</a>]<br /> <br /> Please patch the stock kernel.