0005219: Please enable TOMOYO security module in centos plus kernel package
I'd like to propose enabling TOMOYO security module for centos plus kernels.<br /> TOMOYO 2.x is a in-tree module but not enabled by default.<br /> Just enabling CONFIG_SECURITY_PATH=y and...
View Article0004586: Build centosplus kernels for CentOS-6
Tracking for centosplus kernels for CentOS-6
View Article0005200: sudo ldap not working
I have upgraded centos 6.0 with cr repo, so the sudo version is 1.7.4p5-7.el6-x86_64 and now can't find out which file used for sudo ldap config.<br /> It seems to be in nslcd.conf, but there I...
View Article0005260: bad symlink /usr/sbin/dbcheck
Installing bacula-storage-mysql-5.0.0-7.el6.x86_64 sets a symlink<br /> /usr/sbin/dbcheck -> /etc/alternatives/bacula-bscan<br /> This is wrong and causes various malfunctions, such as...
View Article0005261: make_catalog_backup.pl creates .my.cnf with bad mode
The script /usr/libexec/bacula/make_catalog_backup.pl creates the file /var/spool/bacula/.my.cnf with mode 0066 (----rw-rw-) and subsequently fails with the error message:<br /> <br />...
View Article0005263: 'ps' reports incorrect CPU usage
'ps' showing incorrect CPU% e.g. right now its showing <br /> <br /> mysql using 46877444% CPU<br /> rsyslogd using 12352426% CPU<br /> <br /> which is impossible since...
View Article0005264: Cannot install
Due to new (awful) Gnome interface I had to install 5.7 version. But cannot becase of both 64 and 32 distributives are not valid for installation. They hangs at the and modifying MBR so the system is...
View Article0005259: Anaconda looses nameserver in "/etc/resolv.conf" after package...
I am running into an issue where my Kickstarted CentOS 6.0 systems lose their "nameserver <DNS server>" configuration option in "/etc/resolv.conf" during the installation process. When Anaconda...
View Article0004993: /etc/abrt/gpg_keys still references RHEL keys
GPG keys referenced in /etc/abrt/gpg_keys are still RHEL specific:<br /> <br /> The entries for:<br /> /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-beta-2<br />...
View Article0005265: Bacula-fd init script fails to account for commenting of lines when...
If you install bacula-fd and comment out the password lines rather than replacing the placeholders, then the service bacula-fd fails to start citing<br /> <br /> Starting bacula-fd: Error:...
View Article0005262: Ethernet interfaces with VLAN and IP aliases are not started...
eth1 is in VLAN 709 and has some IP aliases.<br /> <br /> In /etc/sysconfig/network VLAN is set to "yes".<br /> ifcfg-eth1.709 contains:<br /> DEVICE="eth1.709"<br />...
View Article0005266: dm_multipath is still active after multipathd has stopped --> OS is...
My server is locking up while rebooting or halting because shutting down multipath does not really work.<br /> <br /> The server is using an active/passive multipath iscsi...
View Article0005267: Please don't stop netconsole upon shutdown
Stopping netconsole makes absolutely no sense.<br /> It's very useful to capture kernel panic at shutdown time (as long network is up).
View Article0005084: Tomcat6 init.d script sets ownership of log files wrong, breaking if...
On RH EL6 you can run tomcat6 as a user other than the default 'tomcat' by setting TOMCAT_USER in the configuration and making sure that $TOMCAT_USER is in the tomcat group.<br /> <br />...
View Article0005268: the ext3fs.img file in the squashfs.img is incorrectly named
Extracted the data from the squashfs.img in the Centos 6 LiveDVD and then proceeded to try to mount the file ext3fs.img<br /> <br /> sudo mount -t ext3 -o loop...
View Article0005270: yum geoip based mirror selection broken
Every time I run a yum update or check-update, yum consistently points to mirrors in Asia, yet I am based in Ireland. I only noticed this last week on a CentOS6 test machine, and was then able to...
View Article0005271: missing dependency mt-st
Package bacula-storage-common contains script /usr/libexec/bacula/mtx-changer which uses the mt command and fails quite ungracefully if it is missing.<br /> The mt command is provided in the...
View Article0003924: piranha-0.8.4-13.el5 breaks LVS
The piranha-0.8.4-13.el5 package that was part of the 5.4 update breaks Director LVS (I have not tried the update with NAT LVS).<br /> <br /> /var/log/messages complains that:<br />...
View Article0004872: Unstable LVS (piranha)
The loadbalancer stops working, when one of the nanny-processes dies or the lvsd-process get a TERM-signal.<br /> The lvsd stops the remaining nannys, goes into defunct status, the pulse...
View Article0001613: LVS does not bring up Virtual IP's
We have just installed two new CentOS 4.4 boxes with the CentOS <br /> Cluster<br /> Suite repositories installing ipvsadm-1.24-6 and piranha-0.8.2-1.<br /> <br /> We are having...
View Article